Document Logs
Change log:
Date: | Author: | Version: | Changes: | Ext. | Int. | Is in Core |
---|---|---|---|---|---|---|
26 May 2011 | DWN | 0.1 | Doc. created |
|
|
|
15 March 2012 | CM | 0.2 | New parameter Tree |
|
|
|
28 August 2012 | CM | 0.3 | Added new parameter values |
|
|
|
01 March 2013 | JSK | 0.4 | Added extra column descriptions for CDR_FILE_DEF and CDR_RECORD_DEF. |
|
|
|
07 October 2013 | JSK | 1.12 | Added section 3.1.11 concerning Hookpoint Invokation in the Pre or Post process of file processing. |
|
|
|
14 May 2014 | KTH | 1.12.1 | Added new parameter: DB_SYS_PACKAGE_NAME |
|
|
|
22 May 2014 | KTH | 1.12.2 | Added new Parameter: CHARACTER_ENCODING | |||
30 October 2015 | KTH | 1.13 | Added new column SEQUENCE to CDR_RECORD_DEF table Added new column XML_FILE_NAME_COLUMN to CDR_FILE_DEF table (Available for FileProcessor Integration project version 2.2) |
1 - Purpose of Document
This document presents the design of the file processor framework. This framework can be used to load and export any type of ASCII-based file. The design has been based on loading and exporting of CDR (Call Detail Records) ASCII files. As such must references have been made to CDR files. However, the same concept has been used for loading/exporting other non-CDR ASCII based files
2 - Design Overview
A CDR File is a file containing CALL DETAIL RECORDS in a pre-defined format and order. This document aims at modelling a CDR File in a generic way. This could also be extended to any normal ASCII-based file. As such this document could also be used to model any ASCII-based file.
2.1 Design
A CDR file is made up of one or more logical CDR Records separated by a pre-defined separator (delimiter). The default separator is the systems line separator which in most cases is a carriage return line feed.
A CDR file has three types of records.
- Header Record
- Body Record
- Trailer Record.
A CDR record is made up of one or more CDR fields, separated by a pre-defined separator.
A CDR record may be identified by one or more CDR_RECORD_IDENTIFIERs. The default record (NO CDR_RECORD_IDENTIFIER) is a detail record.
A CDR Field contains values in a pre-defined format, which will henceforth be referred to as a CDRFieldFormatDef (CDR_FIELD_FORMAT_DEF).
2.2 CDR File Model
A CDR File is made up of one or more physical lines (lines in a normal file). A CDR File is also made up of one or more logical lines. A physical line may contain one or more logical lines. A logical line represents a CDR record. Hence, it is possible for a logical line to span one or more physical lines. A delimiter or separator determines the separation of a physical line into logical lines.
In a typical scenario, one physical line will equal one logical line.
To model the description presented in section 2.1 the following tables are defined:
- CDR_FILE_DEF (class CdrFileDef)
- CDR_RECORD_DEF (class CdrRecordDef)
- CDR_FIELD_DEF (class CdrFieldDef)
- CDR_FIELD_FORMAT_DEF (class CdrFieldFormaDef)
- CDR_RECORD_FIELD_DEF (class CdrRecordFieldDef)
- CDR_RECORD_IDENTIFIER (class CdrRecordIndentfier)
- CDR_PARSER (class CdrParser)
- ITEM_SEPARATOR (class ItemSeparator)
All the above mentioned classes are persistent. In addition to the persistent classes, the following non-persistent helper classes are present:
- CdrFile
- CdrRecord
- CdrField
Figure 2.1 (below) represents the above tables and their respective classes:
Figure 2.1 Data Model for CDR file
A file definition (CDR_FILE_DEF) defines the source table where the source information of files to be loaded are stored. The file definition defines a BILLING_SOURCE_CLASS, a filename format, and a pre- and post-processor method. These methods - if present - must be located in the defined BILLING_SOURCE_CLASS. If the filename format is present, then only filenames that match this format will be loaded, otherwise all files defined in the incoming folder will be loaded. The location of the incoming, processed and error folders are defined in a file transmitter (FILE_TRANSMITTER) linked to a file processor (CDR_FILE_PROCESSOR). A file definition also defines a parser (CDR_PARSER) for parsing the file into one or more records.
Linked to a file definition are one or more record definitions (CDR_RECORD_DEF : CDR_RECORD_DEF.CDR_FILE_DEF.ID = CDR_FILE_DEF.ID). There are three types of record definitions; HEADER, DETAIL and TRAILER (CDR_RECORD_DEF.CODE in ('HEADER','DETAIL','TRAILER')). For loading MMD-CDRS, all the three record definition types are used.
Each record definition consists of one or more field definitions (CDR_FIELD_DEF) which define the fields that make up a record and the source table of the values these fields will assume in the export file. A record definition contains a field separator (ITEM_SEPARATOR : CDR_RECORD_DEF.FIELD_SEPARATOR_ID = ITEM_SEPARATOR.ID) that defines a delimiter for separating fields within a record.
A record definition also defines a parser (CDR_PARSER) for parsing the record into one or more fields using the defined field separator.
In order to identify a record type (HEADER,DETAIL,TRAILER), a record identifier (CDR_RECORD_IDENTIFIER) is defined. A record identifier defines a record definition (CDR_RECORD_DEF_ID), a field position (CDR_FIELD_POSITION) and a default field value (DEFAULT_FIELD_VALUE). For example, an MMD-GSM header record is identified by the string 'HD' in position 1 of the record. When a record is loaded and if the record has the value 'HD' at position 1, then the record is considered a header record.
A detail MMD-CDR record has no record type identifier. When an MMD-CDR is loaded, a record is first checked for an identifier. If an identifier can be located, then the record definition identified by the record identifier is used, otherwise the record definition (CDR_RECORD_DEF) without an identifier is used. This means that if a file definition (CDR_FILE_DEF) has N types of record types, then there must be at least N-1 record type definitions, otherwise loading will fail.
A field definition has a field format definition (CDR_FIELD_FORMAT_DEF: CDR_FIELD_DEF.CDR_FIELD_FORMAT_DEF_ID = CDR_FIELD_FORMAT_DEF.ID) that defines the format to be assumed by the field in the export file. A field definition also defines any padding or fillers that must be added to the field before it is written to a file.
2.3 File Processing Model
A CDR File (CDR_FILE_DEF) is processed by a CDR File Processor (CDR_FILE_PROCESSOR), i.e. the file is loaded and parsed or generated and made ready for export. This processing is modelled by the following classes.
- CdrFileProcessor (Table CDR_FILE_PROCESSOR)
- CdrFileLoader (Table CDR_FILE_PROCESSOR)
- CdrFileGenerator (Table CDR_FILE_PROCESSOR)
- FileTransmitter
The CdrFileLoader and CdrFileGenerator are sub-classes of the CdrFileProcessor. The FileTransmitter will implement a Transmitter interface.
The above design is shown in figure 2.3.1 below:
Figure 2.3.1 File Processor UML.
3 Model Description
3.1 Loading Files
To configure the loading of a file, the following must be defined or configured.
3.1.1 CDR File Definition (CDR_FILE_DEF)
A CdrFileDef defines a CDR file and is defined by a unique ID and KEY. A CDR File Definition must define a CdrParser (CDR_PARSER_ID pointing to a record in the CDR_PARSER table) to be used for parsing the records in the CDR File, and a record separator (RECORD_SEPARATOR_ID pointing to a record in the ITEM_SEPARATOR table). In a normal scenario, it is assumed that the record separator will be a carriage return line feed. In addition to the above mentioned attributes some more attributes are present as shown in figure 1.1. A CdrFiledef consists of one or more CdrRecordDefs. The column present in the CDR_FILE_DEF table have been presented in figure 2.1. Some important columns worth describing include:
COLUMN NAME | DESCRIPTION |
---|---|
NAME | Name of the Cdr File Definition |
DESCRIPTION | Description of Cdr File Definition |
KEY | Unique key of a file defintion |
CODE | Code, in-case sub classing is needed in the future |
MAX_RECORDS | Maximum number of records in a file (Default value -1 (no maximum number of records)) |
CDR_PARSER_ID | Parser used for parsing a file into records (CDR_PARSER_ID = CDR_PARSER.ID) |
BILLING_SOURCE_TABLE_NAME | Table name for storing file information source |
RECORD_SEPARATOR_ID | Type of separator used for separating one record from another (RECORD_SEPARATOR_ID = ITEM_SEPARATOR.ID). The default is a carriage return line feed |
FILENAME_FORMAT | Format of filename to be loaded (Perl regular expression format). If set only filenames that match the format will be processed otherwise all files are processed |
EXPORT_TYPE | The type of file records to be exported. Used when generating export files. The source table (for export) must have a column with name 'EXPORT_TYPE' whose value must match this value |
PRE_EXPORT_PROCEDURE | Used when exporting files. Called before any final generation processing commences. Used to add extra export values that can only be added at time of export |
XML_DOCUMENT_DEF_ID | Used when exporting XML files. (XML_DOCUMENT_DEF_ID = XML_DOCUMENT_DEF.ID) |
BILLING_SOURCE_CLASS | Class used to model the table defined in the column 'BILLING_SOURCE_TABLE_NAME' |
FILE_NAME_SUFFIX | Suffix (extension) to be added to the export filename |
FILE_NAME_GENERATOR_METHOD | Method on the BILLING_SOURCE_CLASS used to generate a filename during export. This method must take the ID of the record in the 'BILLING_SOURCE_TABLE_NAME' table, and the CDR_FILE_DEF ID as parameters. For example for exporting a CDR file, the ID will be the ID of the appropriate SP_FILE_HEADER record linked to the rated BILLING_RECORDs (BILLING_RECORD.SP_FILE_ID = SP_FILE_HEADER.ID) being exported. |
PRE_PROCESSOR_METHOD | Method in the BILLING_SOURCE_CLASS called before processing a file. The method must take CdrFileDef object as parameter. Could be used to validate if a file has already been loaded or to delete all records in a table before loading. |
POST_PROCESSOR_METHOD | Method in the BILLING_SOURCE_CLASS called after processing a file. The method must take CdrFileDef object as parameter. Could be used for validating contents of the detail against information on the trailer. |
RECORD_FOR_HEADER | Possible values are Y and N. This column is solely taken into an account, if the PERSIST column has the value Y. In case the first line in the loaded file must be stored in the BATCH_FILE_LINE table, the RECORD_FOR_HEADER column must be set to Y. |
STATUS_COLUMN_NAME | String value. Defines the column name for status of billing source table. If left empty a default name of STATUS is used. |
NUMBER_OF_RECS_COLUMN_NAME | String with default value 'NUMBER_OF_RECS'. Defines the column name, where the number of the content lines in a loaded file must be stored. |
DATE_LOADED_COLUMN_NAME | String with default value 'DATE_LOADED'. Defines the column name, where the time of the loading must be stored. The column is mandatory in the billing source table. |
SAVE_RECORD_ORDER | Char with possible values 'Y'/'N' and default value 'N'. Defines whether line number of a loaded record must be stored in the db. |
RECORD_ORDER_COLUMN_NAME | String with default value 'LINE_IN_FILE'. Defines the column name, where the line number of the loaded record must be stored. |
STATUS_VALUE | String with default value '0'. Defines the status of the loaded file. |
COMMENT_COLUMN_NAME | Defines the column name in the billing source table (defined in the column billing_source_table_name), where error messages are posted, if a file generation fails. Not mandatory in the billing source table. If left out, error messages are simply not posted in the billing source table. |
PRE_PROCESSOR_HOOKPOINT_KEY | Sets the Hookpoint key to be called in the pre-process. Is invoked with the prefix FILE_PROCESSOR_. |
POST_PROCESSOR_HOOKPOINT_KEY | Sets the Hookpoint key to be called in the post-process. Is invoked with the prefix FILE_PROCESSOR_. |
XML_FILE_NAME_COLUMN | This column can be used to generate both a flat file and also an Xml file for the same source record. The value of XML_FILE_NAME_COLUMN must be the name of the column from the Source table where the generated XML filename will be saved to. The FILENAME column of Source table will be used to save the filename, if this CDR_FILE_DEF.XML_FILE_NAME_COLUMN is empty. If both a flat file and an XML file should be generated on the same source record:
|
3.1.2 CDR Record Definition (CDR_RECORD_DEF)
A CDR Record Definition (CDR_RECORD_DEF) defines a record in a CDR file and has the following columns in the CDR_RECORD_DEF table.
COLUMN NAME | DESCRIPTION | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | Unique table ID | ||||||||||||||||||||||||||||||
NAME | Name of record definition | ||||||||||||||||||||||||||||||
CODE | Code for sub-classing should one of the following DETAIL, HEADER, TRAILER | ||||||||||||||||||||||||||||||
DESCRIPTION | Record definition description | ||||||||||||||||||||||||||||||
CDR_FILE_DEF_ID | ID of CDR_FILE_DEF to which this record definition record belongs | ||||||||||||||||||||||||||||||
FIELD_SEPARATOR_ID | Defines what separates one record field from another. Points to a record in the ITEM_SEPARATOR table (CDR_RECORD_DEF.FIELD_SEPARATOR_ID = ITEM_SEPRARATOR.ID) | ||||||||||||||||||||||||||||||
MAX_LENGTH | Defines the length of the record; the default value being -1 meaning record is of variable length | ||||||||||||||||||||||||||||||
FULL_LENGTH | If the MAX_LENGTH attribute is not -1, and the FULL_LENGTH attribute is set to ‘Y’, then the record must be of length MAX_LENGTH. Default value is N | ||||||||||||||||||||||||||||||
CDR_PARSER_ID | Parser used to parse a record into fields. (CDR_RECORD_DEF.CDR_PARSER_ID = CDR_PARSER.ID | ||||||||||||||||||||||||||||||
RECORD_TABLE_NAME | Name of the table where records are saved. Usually for header and trailer records, the value of this table is the SOURCE_TABLE while for detail records it is the record (BILLING_RECORD) table | ||||||||||||||||||||||||||||||
RECORD_TABLE_CODE | Code to be used in the record table in-case sub-classing is to be used | ||||||||||||||||||||||||||||||
RECORD_IDENTIFIER_TYPE | If this value is set, then the record will be identified using a CDR_RECORD_IDENTIFIER. Possible values are 'ALL' or 'AT_LEAST_ONE'. These are explained in subsection 3.1.3. | ||||||||||||||||||||||||||||||
PERSIST | Determines if a record should be persisted. Sometimes, one may not need to persist a CDR_RECORD (as in the case where the record is a header of column name). Default value is 'Y' (meaning persist data) otherwise it is 'N' (meaning do not persist data). | ||||||||||||||||||||||||||||||
RECORD_CLASS | The fully qualified class name of that models the table defined by the RECORD_TABLE_NAME | ||||||||||||||||||||||||||||||
SOURCE_TABLE_KEY | This columns holds the column name in RECORD_TABLE_NAME table that points to the SOURCE TABLE. This is used by CDR_RECORD_DEFs. | ||||||||||||||||||||||||||||||
STATUS_COLUMN_NAME | String value. Name of the column where the record status must be stored. | ||||||||||||||||||||||||||||||
STATUS_VALUE | Value to be set in status column defined in STATUS_COLUMN_NAME. | ||||||||||||||||||||||||||||||
HOOKPOINT_KEY | If this is set, it will save this value into RECORD_TABLE_NAME.HOOKPOINT_KEY, not a mandatory value. | ||||||||||||||||||||||||||||||
SEQUENCE | SEQUENCE column is used to define multiple record definitions for same record type (i.e. for example multiple record definitions for HEADER record for same File Definition) and define the sequence in which they can appear in the exported file. For example, if an exported file should contain 3 lines in the header and each of these lines has a difference structure, then it is possible to define 3 HEADER record definition entries with SEQUENCE 1, 2 and 3 based on the required order of these lines in the file. Then the file processor with get all the header definitions and handles one by one in the defined sequence, writing the lines matching that record definition only. Important Note: If only one record definition entry is needed for a record type, then the SEQUENCE Column of that record definition entry must be left empty.
Example:
|
3.1.3 CDR Record Identifier (CDR_RECORD_IDENTIFIER)
A CdrRecordIdentifier consists of:
- a CDR_RECORD_DEF_ID (CDR Record DEF)
- a field position (CDR_FIELD_POSITION), and
- a default value (DEFAULT_FIELD_VALUE).
A Cdr Record Definition can have zero or more CDR_RECORD_IDENTIFIERs. The CDR Record Identifier is used for identifying a CDR RECORD. For example, a Header Cdr Record might be identified by its first field being ‘HD’. In this example, a header CDR_RECORD_DEF will have an entry in the CDR_RECORD_IDENTIFIER table with CDR_FIELD_POSITION equalling 1 and the default field value equalling ‘HD’. In this situation, the RECORD_IDENTIFIER_TYPE attribute in the CDR_RECORD_DEF table will be ‘ALL’.
In another example, a CDR detail record might be identified by at least one of the following values; ‘20’,’21’,’22’, in its first field. In this scenario the CDR_RECORD_DEF for the detail record will have three entries in the CDR_RECORD_IDENTIFIER table each with a field position equal to 1 and default field value ‘20’,’21’,’22’, respectively.
3.1.4 CDR Field Definition (CDR_FIELD_DEF)
A Cdr Field Defintion (class : CdrFieldDef, Table: CDR_FIELD_DEF), defines a field in a record (CDR_RECORD_DEF). Its attributes are shown in figure 2.1 and has the following columns.
COLUMN NAME | DESCRIPTION |
---|---|
ID | Unique ID |
NAME | Name of Field |
CODE | For sub-classing |
DESCRIPTION | Description of field |
FILE_SPECIFICATION_NAME | Name of field in the Specification document |
DB_COLUMN_NAME | Name of field in the Database table |
CDR_FIELD_FORMAT_DEF_ID | ID of the format definition used to format the field, (CDR_FIELD_DEF.CDR_FIELD_FORMAT_DEF_ID = CDR_FIELD_FORMAT_DEF.ID) |
SUMMABLE | Not used |
SUM_FIELD_DEF_ID | Not used |
MAX_LENGTH | Defines the maximum length of a field |
FULL_LENGTH | Defines if the length of the field must be equal to MAX_LENGTH. |
MANDATORY | Defines if the field must have a value |
FIELD_POSITION | Defines the position of the field in a record (Not actually used) |
START_INDEX | Defines start index of field in record. If a record does not have index separated fields, then this value is set to -1 |
END_INDEX | Defines end index of field in record. If a record does not have index separated fields, then this value is set to -1 |
FILLER | Defines what to use to fill the field. For example leading or trailer zero, white space, etc. Used for exporting |
PADDING | Defines where the fillers should be placed on the field. Possible values are LEFT or RIGHT or NONE. Used for exporting |
FORMAT | Defines the format of the field. If present, it is used, otherwise the value in the defined CDR_FIELD_FORMAT_DEF is used |
EXPORTER_METHOD | A method on the CdrField class that must be called before this field is exported |
EMPTY_WHEN_ZERO | Sometimes a field might have a value of zero in the database, but should be exported as an empty field. This field can take either 'Y' or 'N' as values. default value is 'N', meaning field is exported as it is, otherwise if the field has a value of zero, it is exported as an empty string |
3.1.5 CDR Record Field Definition (CDR_RECORD_FIELD_DEF)
A CDR record field definition (Class:CdrRecordFieldDef, Table: CDR_RECORD_FIELD_DEF) defines the position (FIELD_POSITION) of a CdrFieldDef (hence a CdrField) in a CdrRecordDef (hence a CdrRecord). The CdrRecordFieldDef implements the ISequence interface. This interface ensures that no two CdrFieldDefs in a CdrRecordFieldDef have the same position. If a CdrFiedDef is added to a CdrRecordDef with the same position as an already existing CdrFieldDef, the new CdrFielddef will take the place of the old CdrFieldDef and the old CdrFielddef will be pushed on to a position behind.
Each time a new CdrFieldDef is added to a CdrRecordDef, an entry is made in the CDR_RECORD_FIELD_DEF table. The method addCdrFieldDef(CdrFieldDef, int) takes the CdrFieldDef to be added and the position the field occupies. This method returns the next available position to which a new CdrFieldDef could be added. A CdrRecordDef consists of one or more CdrRecordFieldDefs.
The following columns are found in the CDR_RECORD_FIELD_DEF table:
COLUMN NAME | DESCRIPTION |
---|---|
ID | Unique ID |
CDR_RECORD_DEF_ID | ID of Record Defintion |
CDR_FIELD_DEF_ID | ID of Field Definition |
FIELD_POSITION | Position of the field in the record. Start position is 1 |
3.1.6 CDR Field Format Definition (CDR_FIELD_FORMAT_DEF)
A CDR field format definition (Class:CdrFieldFormatDef, Table: CDR_FIELD_FORMAT_DEF) defines the format of a field definition (CDR_FIELD_DEF). It has the following columns:
ID | Unique ID |
NAME | Name of Field format definition |
CODE | Code used for sub-classing. There are a number of sub-classes as shown in figure 2.1 |
DESCRIPTION | Description of field format definition |
FILLER | Filler used to format field before export. If present in the corresponding CDR_FIELD_DEF, the filler from CDR_FIELD_DEF is used |
PADDING | Padding used to format field before export. If present in the corresponding CDR_FIELD_DEF, the padding from CDR_FIELD_DEF is used |
DECIMAL_PLACES | Number of decimal places to use. If decimal format is present in the corresponding CDR_FIELD_DEF, the format from CDR_FIELD_DEF is used |
DECIMAL_SEPARATOR | No longer used. The COUNTRY_LOCALE now defines the decimal separator |
DATE_FORMAT | Format of date, if this is a date format definition (CODE = 'DATE'). If format is present in the corresponding CDR_FIELD_DEF, the format from CDR_FIELD_DEF is used |
DATA_FORMAT | Format of field data (regular expression), if this is a data format definition (CODE = 'DATA'). If format is present in the corresponding CDR_FIELD_DEF, the format from CDR_FIELD_DEF is used |
TIME_FORMAT | Format of time, if this is a time format definition (CODE = 'TIME'. If format is present in the corresponding CDR_FIELD_DEF, the format from CDR_FIELD_DEF is used |
COUNTRY_LOCALE | Locale used to define the decimal separator, Used for Decimal (CODE = 'DECIMAL'), signed-decimal (CODE = 'SIGNED-DECIMAL') format definitions. Examples are such as "NL" and "GB" |
3.1.7 Item Separator (ITEM_SEPARATOR)
An Item Separator (Class:ItemSeparator, Table: ITEM_SEPARATOR) defines how an item (CDR_RECORD (in a file) or CDR_FIELD (in a record)) is separated. An item separator has a SEPARATOR attribute that defines what separates a record/field from another. The default separator for a CDR_RECORD is a carriage return line feed while there is no default separator for a CDR_FIELD. This has to be defined.
An Item separator is used by a CDR Parser to parse a CDR record and a CDR Field. Special types of Item separator exists. These include the Index Item Separator and the Null Item separator. As a NULL cannot be defined in the database, NULL item separator (Null delimiter) has been defined. When a NULL item separator is used, the system will set the correct Java definition of a null string as the separator. When records or fields are separated by indexes, the Index Item Separator (Index delimiter) is used. In order to use an Index Item separator the start index, end index and the max. length of the first record/field must be defined. Please note that the start index, end index and max. length on an Index Item separator are used only to identify the first record/field. The locations of the subsequent fields must be defined in the CDR_FIELD_DEF.
The Item Separator table has the following columns:
COLUMN NAME | DESCRIPTION |
---|---|
ID | Unique ID |
NAME | Name of separator |
CODE | Code for sub-classing |
DESCRIPTION | Description of separator |
SEPARATOR | Defines the separator itself |
START_INDEX | Defines the start index for Indexed fields delimiters (Non indexed delimiters will have a value of -1) |
END_INDEX | Defines the end index of the first field for indexed delimiters (Non indexed delimiters will have a value of -1) |
MAX_LENGTH | Maximum length of first field. Used by Indexed fields delimiters |
START_QUALIFIER | A symbol to indicate the start of a field. A field might contain a delimiter but has a qualifier such as an open quotation mark. For example a semi column field separated record might look like this 24;35;"552;3636";454; and the START_QUALIFIER is " and END_QUALIFIER is ". The this record has 4 fields, as 552;3636 is considered a field since it is between the START AND END QUALIFIERs. This column is not mandatory |
END_QUALIFIER | A symbol to indicate the end of a field . It is not mandatory |
3.1.8 CDR Parser
A CDR Parser (Class:CdrParser, Table: CDR_PARSER) parses a CDR File into CDR records and a CDR record into CDR Fields. A CDR file definition knows the CDR parser it needs to parse a CDR file into CDR records while a CDR record knows the CDR parser it needs to parse a CDR record into fields. By default, a CDR Parser will use the carriage return line feed to parse a CDR file into CDR records. However, to parse a CDR record into CDR Fields a field separator (ITEM_SEPERATOR) is needed. This is set by the appropriate CDR Record Definition at run time.
3.1.9 File Transmitter
The File transmitter (Class:FileTransmitter, Table: FILE_TRANSMITTER) defines where a CDR File is located before processing, where it is put after successful or unsuccessful processing, for loading. It also knows where an export file is to be created and where it should be put after successful or unsuccessful file generation. The File transmitter handles the writing to a file during file generation (export).
3.1.10 CDR File Processor
The CDR File Processor (Class:CdrFileProcessor, Table: CDR_FILE_PROCESSOR) handles both loading and generation (export) of CDR files. A CDR File processor knows the CDR File Definition and File Transmitter to use when handling a CDR File. The CDR FILE PROCESSOR has as sub classes CdrFileLoader (CODE = 'LOADER') and CdrFileGenerator ( CODE = 'GENERATOR'). As the names imply, the CdrFileLoader handles loading of files while the CdrFileGenerator handles generating of files. The CdrFileGenerator does not handle exporting of a file to any third party. This will be handled by a different process.
The CDR_FILE_PROCESSOR table has the following columns
COLUMN NAME | DESCRIPTION |
---|---|
ID | Unqiue ID |
NAME | Name of file processor |
CODE | Code for sub-classing (For loading CODE = 'LOADER' : For exporting CODE = 'GENERATOR' |
DESCRIPTION | Description of file processor |
CDR_FILE_DEF_ID | File definition ID of CDR_FILE_DEF processed by this CDR_FILE_PROCESSOR record |
FILE_TRANSMITTER_ID | File transmitter used to located (before processing) and move files (after processing) |
BRAND_ID | ID of BRAND that will be processed by this CDR_FILE_PROCESSOR record. Used only for generating export files. The BRAND_ID must equal the BRAND_ID on the BILLING_SOURCE_TABLE_NAME of the CDR_DEF_ID record defined by the ID of CDR_FILE_DEF processed by this CDR_FILE_PROCESSOR record. For example, for export of CDR files using the SP_FILE_HEADER as source table, the only records in the SP_FILE_HEADER table whose BRAND_ID is the same as the BRAND_ID for this record will be processed by this record. |
3.1.11 Invoking Hookpoint in the Pre or Post Process
It is possible to invoke a hookpoint in both the pre process and post process of file processing. This functionality is activated by adding the Hookpoint Key to either the PRE_PROCESSOR_HOOKPOINT_KEY or POST_PROCESSOR_HOOKPOINT_KEY column of the CDR_FILE_DEF. If the PRE_PROCESSOR_HOOKPOINT_KEY value is not emty the hookpoint key with the prefix "FILE_PROCESSOR_" with the brand of the CDR_FILE_PROCESSOR is attempted invoked during the specific process. The particular CdrFile object by the FileProcessor is inserted into context under the key "CDR_FILE".
3.2 Generating (Export) Files
In order to generate CDR files for export, in addition to the tables defined in 3.1 above, the following table must also be defined.
Unlike for loading where the header/trailer information of a CDR File is stored in a BILLING SOURCE table, the header/trailer information used for generating an export file is stored in an SP_FILE_HEADER table and the BILLING RECORD table must have a column named SP_FILE_ID, that points to the SP_FILE_HEADER record that will be used to generate the export file. An SP_FILE_HEADER table must have at least the following columns ID, FILENAME, BRAND_ID, STATUS and FILE_CREATED_DATE. These columns are inherently used within the model.
Sometimes, when generating a file for export, some information needed for export (usually in the header and/or trailer records) is not yet present. This information could be generated by a pre-defined stored procedure that will be called before any file is generated for export. If such a pre-defined stored procedure is needed, then it must accept one the SP_FILE_HEADER_ID as parameter since all processing must depended on the SP_FILE to be generated. The column PRE_EXPOR_PROCEDURE on the CDR_FILE_DEF table holds the value of the pre-defined stored procedure. If such a procedure exists, it will be called before the export file is generated.
To generate any other file, the header and trailer records should be stored in the BILLING_SOURCE_TABLE_NAME table defined in the CDR_FILE_DEF while the detail record definition (CDR_RECORD_DEF) pointing to this CDR_FILE_DEF should have a SOURCE_TABLE_KEY appropriate defined as described in section 3.1.2 CDR Record Definition (CDR_RECORD_DEF) and the BILLING_SOURCE_TABLE_NAME table must have a column following columns ID, FILENAME, BRAND_ID, STATUS and FILE_CREATED_DATE. All other processing is the same as described above.
It should be noted that only records in the BILLING_SOURCE_TABLE_NAME table that have status = 1 (ready for export) will be pickec up by the CDR_PROCESSING_ENGINE (CODE = 'GENERATOR')
3.3 Setup Of File Loader and Generator Engines
The CdrFileProcessing engine handles loading files and generating files for export. The CdrFileProcessignEngine takes at most three parameters.
- Parameter 1 is the engine name (“CDR_FILE_LOADER_ENGINE” (for CdrFileLoaderEngine) or “CDR_EXPOR_FILE_GENERATOR_ENGINE” (for CdrExportFileGeneratoeEngine)), or “CDR_FILE_PROCESSING_ENGINE” (for both loading and file generation)).
- Parameter 2 is the Engine Instance Number
- Parameter 3 is the type of processing (“LOADER” (for CdrFileLoaderEngine) or “GENERATOR” (for CdrExportFileGeneratoeEngine)).
If parameter 3 is not set, then the engine will perform both loading and export file generation.
4 Parameter Setup
The following table shows the parameter setup that can be used by CdrFileprocessorEngine. The parameters are under the node "FILE_PROCESSING".
NAME | VALUE | TYPE | OPTIONAL | DESCRIPTION |
---|---|---|---|---|
MOVE_INVALID_FILE | true|false | String | Yes | Defines whether the engine should move files if they do not meet the pattern name criteria |
MAX_FILES_TO_LOAD | integer bigger than 0 | Integer | Yes | Defines the number of files that are processed in a single engine iteration. If not present, the default value is 50 |
BATCH_SIZE | integer bigger than 0 | Integer | Yes | Number of SQL statements size used to load in batch. If not present, the default value is 100 |
DB_SYS_PACKAGE_NAME | SYS/CORE_SYS | String | Yes (Manadatory if CORE_SYS package is used) | Defines the name of the sys package to be used in SQL-statements Default SYS (if this parameter is not defined) |
CHARACTER_ENCODING | <Valid character encoding> | String | Yes | Defines the character encoding to be used while importing the files. If this parameter exists, the encoding specified in this parameter will be used to read the file. Otherwise the default encoding will be used. |