Page Comparison

...

Overview

This page describes the security layers of the REST web app. There are two security layers:

...

Authentication is triggered by the Authorization layer. If a resource does not require Authorization, then it is considered open for access, unless brand access check is in place. The Authentication protocol used is OAUTH2  and the implementation used is from Spring Framework.

...

1. User-authentication  - this corresponds to a Selfcare use-case scenario. The authentication is done by validation username/password in the USERS table. An URL example for this scenario is (note grant_type=password value):
   
   

   Code Block
   title Authentication URL
   https://host:port/appcontext/oauth/token?username=#myusername&password=#mypassword&grant_type=password&brandKeybrand_key=#myBrandKey

   
   

   Code Block
   title CURL example
   CURL example: curl -v -X POST -u myclientid:myclientsecret http://host:port/appcontext/oauth/token -H "Accept: application/json" -d "grant_type=password&username=#myusername&password=mypassword&brandKeybrand_key=#myBrandKey" where: #myusername, #mypassword are taken from Users table #myBrandKey is taken from the Brand table myclientid, myclientsecret are taken from OAUTH_CLIENT_DETAILS table

   
   

   Code Block
   title Angular example
   function login(credentials) { var data = 'username=' + encodeURIComponent(credentials.username) + '&password=' + encodeURIComponent(credentials.password) + '&grant_type=password&scope=read%20write&' + 'client_id=myclientid&' + 'brandKeybrand_key=myBrandKey'; return $http .post('/oauth/token', data, { headers : { 'Content-Type' : 'application/x-www-form-urlencoded', 'Accept' : 'application/json', 'Authorization' : 'Basic ' + base64Service.encode('myclientid' + ':' + 'myclientsecret') } }).success( function(response) { //store the access token return response; }); }     where: credentials.username, credentials.password are taken from Users table myBrandKey is taken from the Brand table myclientid, myclientsecret are taken from OAUTH_CLIENT_DETAILS table

   
   

2. Operator-authentication - this correspnds to a Customercare use-case scenario. The authentication is done by validation username/password in the OPERATORS table. An URL example for this scenario is (note grant_type=operator_password value):
   
   

   Code Block
   title Authorization URL
   https://host:port/appcontext/oauth/token?username=#myusername&password=#mypassword&grant_type=operator_password&brandKeybrand_key=#myBrandKey

   
   

   Code Block
   title CURL example
   CURL example: curl -v -X POST -u myclientid:myclientsecret http://host:port/appcontext/oauth/token -H "Accept: application/json" -d "grant_type=operator_password&username=#myusername&password=mypassword&brandKeybrand_key=#myBrandKey" where: #myusername, #mypassword are taken from Operators table #myBrandKey is taken from the Brand table myclientid, myclientsecret are taken from OAUTH_CLIENT_DETAILS table

   
   

...

1. Brand Access
   In order to obtain an access token, the client has to have configured the proper authorization. That is, in the OAUTH_CLIENT_DETAILS table, a client has to have defined proper values in AUTHORITIES column. Those authorities must have the following prefix: ACCESS_BRAND_ .After the prefix there should be the brandKey brand_key (uppercase) that the respective client has access to. The brandKey brand_key parameter should be sent as QUERY parameter in the request for the token.
   
   Example of registered client:

   CLIENT_ID	RESOURCE_IDS	CLIENT_SECRET	SCOPE	AUTHORIZED_GRANT_TYPES	WEB_SERVRE_REDIRECT_URI	AUTHORITIES	ACCESS_TOKEN_VALIDITY	ADDITIONAL_INFORMATION	AUTOAPROVE
   swagger-ui			swagger-ui-secret	read,write	password,operator_password,client_credentials			ACCESS_BRAND_BRAND_X	600

   
   
   Example: given a brand key with a value of RATOR_X , the authority tag should be ACCESS_BRAND_RATOR_X .
   If a client has access to multiple brands, those should be separated by ,  (e.g ACCESS_BRAND_RATOR_X, ACCESS_BRAND_RATOR_Y)

   Code Block
   title CURL example
   CURL example: curl -v -X POST -u myclientid:myclientsecret http://host:port/appcontext/oauth/token -H "Accept: application/json" -d "grant_type=operator_password&username=#myusername&password=mypassword&brandKeybrand_key=RATOR_X"

   
   

2. Fine-grained access control is about limiting the access to specific resources, or even to limit the access to code blocks within a single resource. The current version of the REST app uses our own framework for this. The framework defines two abstract classes, whose implementations stand in a one-to-one relationship with a resource (an @Path annotated method). The two classes reflect the kind of questions/checks needed in the code.

...

1. the @RatorSecured annotation that can have few input attributes, in orderto define the assesed field or the Role of the logged in user.

// URL - /accounts/{account-id}/subscriptions
map.put(key(HttpMethod.GET,ResourcePathParent.ACCOUNTS, ResourcePath.ACCOUNTID_SUBSCRIPTIONS),new AccessControllerByOwnership(Ownership.SUB_OR_BG_OR_ACC_OWNER));
 
//URL - /accounts/{account-id}/documents
map.put(key(HttpMethod.POST,ResourcePathParent.ACCOUNTS,ResourcePath.ACCOUNTID_DOCUMENTS),new AccessControllerByOwnership(Ownership.ACC_OWNER));
 
//URL - /accounts/{account-id}/documents
map.put(key(HttpMethod.GET,ResourcePathParent.ACCOUNTS,ResourcePath.ACCOUNTID_DOCUMENTS),new AccessControllerByOwnership(Ownership.ACC_OWNER));
 
//URL - /accounts/{account-id}/billing-groups
map.put(key(HttpMethod.GET, ResourcePathParent.ACCOUNTS,ResourcePath.ACCOUNTID_BILLING_GROUPS),new AccessControllerByOwnership(Ownership.BG_OR_ACC_OWNER));

...

@RatorSecured(requiredRole = Role.OPERATOR , assertOn = "subscriptionId")
public Response updateNpFlow(@PathParam("subscription-id") SubscriptionId subscriptionId) {...}

@RatorSecured(requiredRole = Role.SUB_OWNER, assertOn = "userId")
public Collection<ContactPoint> getContactPointsForUser(@PathParam("user-id") UserId userId) {...}

@RatorSecured(requiredRole = Role.OPERATOR, restrictorFactory = OperatorAccessRestrictorFactory.class)
    public Collection<Product> getProducts(@Context RESTContext ctx) { ... } 

Brand Access Check

In case of a multi branded  environment it is possible to restrict access to the "public" endpoints by enabling the brand access check in the configuration file (Properties.txt). This is done by setting the following parameter:

...

When the above parameter is in place an access token (Authorization: Bearer access_token) is required to be sent in the request. For public endpoints one can obtain a access token by using the "clientoperator_credentialspassword" grant type. 

https://host:port/appcontext/oauth/token?grant_type=client_credentials&brandKeyoperator_password&username=#myusername&password=mypassword&brand_key=a_valid_brand_key

CURL example:  curl -v -X POST -u myclientid:myclientsecret http://host:port/appcontext/oauth/token -H "Accept: application/json" -d "grant_type=client_credentials&brandKeyoperator_password&username=#myusername&password=mypassword&brand_key=#myBrandKey"

where:
myclientid, myclientsecret are taken from OAUTH_CLIENT_DETAILS table
#myBrandKey is taken from the Brand table

...

...