| Page Properties | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
SIP TLS is the method that VoIP networks use to secure signaling. Providing SIP TLS protects the SDES key exchange over public networks. The feature helps provide inter-working between secure SIP and secure WebRTC networks
Assumptions
- SIP TLS can be used with or without secure RTP
...
http://www.dialogic.com/webhelp/BorderNet2020/2.2.0/WebHelp/default.htm
Requirements
| # | Title | Importance | Notes |
|---|---|---|---|
| 1 | SHALL support SIP with TLS (RFC5246) and use cases shall follow SIP TLS examples shown in RFC6216 (SIP Secure Call Flows) | ||
| 2 | SHALL support SIP TLS with TLS v1.2, and older (SSLv3 and TLSv1) | ||
| 3 | SHALL support standard cipher suites, such as: TLS_RSA_WITH_AES_128_CBC_SHA and TLS_RSA_WITH_RC4_128_MD5. | ||
| 4 | SHALL allow SIP TLS to establish RTP media with G.711 or to establish T.38 SIP TLS SHALL be independent of media. It SHALL not be required to use SIP TLS to establish a secure media channel. | ||
| Config Tool Requirements | |||
| 5 | SHALL allow a field to enable or disable the use of SIP over TLS. | ||
| 6 | SHALL allow a field to allow the end user to provide a configuration file for SIP over TLS. This configuration file will be used to config the required SIP over TLS parameters. Required parameters will be defined in a seperate TLS configuration document. |
| |
| 7 | If SIP over TLS is enabled and the configuration file can not be found, an error will be generated in the ECC log. When reading the SIP over TLS configuration file, the parsing of the parameters will be shown in the ECC log file.
| ||
| 10 | SIP TLS implementation SHALL be tested against a variety of endpoints and network equipment for accurate implementation. | BN2020 gateway, Cisco Gateway |
| . other Dialogic products. | |||
| Licensing | |||
| 20 | SIP over TLS supported on by a single license |
keyword (Security). This keyword enables TLS functionality on a per system basis. To enabled security the system must have installed security licenses equal or greater than the number of fax channels installed. For example, if the customer has an 8 channel SR140 fax licenses and only 2 channels of security, the system will not support security features. If they are licensed for 8 or more security channels, security features will be available on the system. Add on part will need to be defined to add security to an existing SR140 deployment. This part will be added to the back office for normal order processing and will allow the end user to activate a security LAC via the current methods. The SR140 base feature license will not include Security support. Added support MUST require a |
separate add-on LAC for security. |
951-105-21 SR140-EVAL-Feature-Security (eDelivery) 951-105-22 SR140-NFR-1YR-Feature-Security (eDelivery) 951-105-23 SR140-2-Feature-Security (eDelivery) 951-105-24 SR140-4-Feature-Security (eDelivery) 951-105-25 SR140-8-Feature-Security (eDelivery) 951-105-26 SR140-12-Feature-Security (eDelivery) 951-105-27 SR140-24-Feature-Security (eDelivery) 951-105-28 SR140-30-Feature-Security (eDelivery) 951-105-29 SR140-48-Feature-Security (eDelivery) 951-105-50 SR140-60-Feature-Security (eDelivery) 951-105-51 SR140-DEV-1YR-Feature-Security (eDelivery) | BRKT-707 | ||
| Documentation Requirements TBD | |||
| 50 | COO Will need to be updated with changes to include OpenSSL into the product. Will be required for both Windows and Linux. | ||
| Radvision Stack | |||
| 60 | The Ravision SIP stack will be updated to a version that support SIP over TLS v1.2. This update will be performed for the SIP portion of the stack only and will not impact the H.323 stack. Both the Windows and the Linux stack will be updated. | ||
User interaction and design
...