...
| # | Title | Importance | Notes | ||||
|---|---|---|---|---|---|---|---|
| 1 | SHALL support SIP with TLS (RFC5246) and use cases shall follow SIP TLS examples shown in RFC6216 (SIP Secure Call Flows) | ||||||
| 2 | SHALL support SIP TLS with TLS v1.2, and older (SSLv3 and TLSv1 security) | ||||||
| 3 | SHALL support standard cipher suites, such as: TLS_RSA_WITH_AES_128_CBC_SHA and TLS_RSA_WITH_RC4_128_MD5. | ||||||
| 4 | SHALL allow SIP TLS to establish RTP media with G.711 or to establish T.38 SIP TLS SHALL be independent of media. It SHALL not be required to use SIP TLS to establish a secure media channel. | ||||||
| Config Tool Requirements | |||||||
| 5 | SHALL allow a field to enable or disable the use of SIP over TLS. | ||||||
| 6 | SHALL allow a field to allow the end user to provide a configuration file for SIP over TLS. This configuration file will be used to config the required SIP over TLS parameters. Required parameters will be defined in a seperate TLS configuration document. |
| | ||||
| 7 | If SIP over TLS is enabled and the configuration file can not be found, an error will be generated in the ECC log. When reading the SIP over TLS configuration file, the parsing of the parameters will be shown in the ECC log file.
| ||||||
| 710 | SIP TLS implementation SHALL be tested against a variety of endpoints and network equipment for accurate implementation. | BN2020 gateway, Cisco Gateway, SIP registrar (such as OpenSIPS) | |||||
| 820 | SIP over TLS supported on by a single license keywork (Security). This keyword enables TLS functionality on a per system basis. Add on part will need to be defined to add security to an existing SR140 deployment. This part will be added to the back office for normal order processing and will allow the end user to activate a security LAC via the current methods. The SR140 base feature license will not include Security support. Added support MUST require a seperate add-on LAC for security. | Part #951-105-20 | |||||
| Documentation Requirements TBD | |||||||
| 50 | COO Will need to be updated with changes to include OpenSSL into the product | Part numbers will need to be defined for SR140 with Security. Add on part will need to be defined to add security to an existing SR140 deployment. | |||||
User interaction and design
...